Cheersonic Ultrasonics Co.,Ltd
call us on: +86 571 87910406

Ultrasonic Silicon Solar Cells Coating Spraying Machine

Ultrasonic Silicon Solar Cells Coating Spraying Machine

Ultrasonic Silicon Solar Cells Coating Spraying Machine

Product Details:

Ultrasonic Silicon Solar Cells Coating Spraying Machine

Silicon Solar Cells

Amorphous silicon (a-Si) is a popular solar cell material owing to its low cost and ease of production. Owing to disordered structure (Urbach tail), its absorption extends to the energies below the band gap resulting in a wide-range spectral response; however, it has a relatively low solar cell efficiency. The efficiency is higher in protocrystalline silicon and it has also been shown to improve stability, but not eliminate it. Protocrystalline Si also has a relatively low absorption near the band gap owing to its more ordered crystalline structure. Thus, protocrystalline and amorphous silicon can be combined in a tandem solar cell where the top layer of thin protocrystalline silicon absorbs short-wavelength light whereas the longer wavelengths are absorbed by the underlying a-Si substrate. Such two-layer cells can be produced at a relatively low temperature of 75 °C and have an efficiency of about 5%, and a four-layer cells yield an open circuit voltage above 3.1 V.

CdTe Solar Cells.jpg Natcore-black-silicon-solar-cell-panel_副本.jpgsolar-cell-image_副本.jpg

Silicon Solar Cells Coating Results

Ultrasonic Spray pyrolysis is a Chemical vapor deposition (CVD) method utilized in the formation of a variety of materials in thin film or nanoparticle form. Precursor materials are often fabricated through sol-gel methods and examples include the formation of aqueous silver nitrate, synthesis of zirconia particles, and fabrication of solid oxide fuel cell SOFC cathodes.

The Effect of Ultrasonic Spraying Machine

CHEERSONIC independently developed ultrasonic spray device, can achieve directional spraying solar energy, saving materials can save 90% of the raw material, thus avoiding the environmental pollution and the subsequent steps of the process. Currently, solar cells are the most advanced spraying technology. Currently CHEERSONIC developed ultrasonic spraying equipment has been developed on the basis of stand-alone operation of the pipeline system, streamline batch applications, greatly improving the rate of preparation, provide strong technical support for the realization of industrial production experiments. We can test for free, and give a lot of the best solution, including the production, secondary production, assembly line, and the optimized revamping existing production lines.

Silicon Solar Cells Coating Spraying Video

https://youtu.be/M4c54cH8enI

Standard Parameter 

Model

UAC120

Spray Head

Titanium

Frequency

120 Khz

Max Power

10 Watt

Drops Sizes

0.1-10 microns

Applycation

Medical/Glass/Electronics/Nano

Generator Model

CS100D

Generator Size

315x312x135mm

Generator Brand

Cheersonic

Generator N/W

5Kg

Cable Length

3M/5M/10M

Customized

Yes

Professional in ultrasonic field, CHEERSONIC is well-known as one of the leading ultrasonic silicon solar cells coating spraying machine manufacturers. Customized business is also offered in our factory. Now, welcome to wholesale our ultrasonic silicon solar cells coating spraying machine at reasonable price and get the free sample with us.

Feedback
Contact Us

The website is due and can not reply to the message. If necessary, you can send an email to market2@cheersonic.com, or you can go to www.cheersonic.com for details.

Read more:www.cheersonic.com

If you need to contact us,market2@cheersonic.com

Add:NO.8 Shengda Road, Fuyang, Zhejiang, ChinaContact:Candy lieTel:+86-571-87910406Mob:+86-13588732518Fax:+86-571-63368886E-mail:service@cheersonic.com

Copyright © Cheersonic Ultrasonics Co.,Ltd